 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OC-3/STM-1 SFP Transceivers with Digital Diagnostics TRPE03-E1 Single Mode Produ c t D es c rip tion The TRPE03-E1 SFP series of fiber optic transceivers w ith integrated digital diagnostics monitoring functionality provide a quick and reliable interface for short reach ( ,intermediate reach ( and long reach ( SR) IR) LR) applications. The diagnostic functions, alarm and w arning features as described in the Multi-Source Agreement ( MSA ) document, SFF-8472 ( Rev. 9.4) are provided via an I2C serial interface. , Available products under this series are compliant w ith applicable SONET/ SDH standards for OC-3/STM-1. A ll modules satisfy Class I Laser Safety requirements in accordance w ith the U .S. FDA /CDRH and international IEC-60825 standards. The TRPE03-E1 transceivers connect to standard 20-pad SFP connectors for hot plug capability. This allow s the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers w ithout removing the pow er supply from the host system. The transceivers have colored bail-type latches,w hich offer an easy and convenient w ay to release the modules. The latch is compliant w ith the SFP MSA . The transmitter design incorporates a highly reliable 1310nm or 1550nm InG aA sP laser and a driver circuit. The receiver features a transimpedance amplifier IC optimized for high sensitivity and w ide dynamic range. The transmitter and receiver DATA interfaces are AC-coupled internally. LVTTL Transmitter Disable control input and Loss of Signal output interfaces are also provided. The transceivers operate from a single +3.3V pow er supply over tw o operating case temperature ranges of -5C to +70C ( COM) or -40C to , +85C ( IND) The housing is made of metal for EMI immunity. . F ea tu res Compatible w ith SFP MSA Compliant w ith SONET/SDH OC-3/STM-1 ( 155Mb/s) SONET/SDH Reaches ( SR-1,IR-1,LR-1 & LR-2) Digital Diagnostics through Serial Interface Internal Calibration for Digital Diagnostics Eye Safe ( Class I Laser Safety) Duplex LC Optical Interface -40C to +85C Operating Case Temperature Option Excellent EMI & ESD Protection H ot-pluggable TX Fault & Loss of Signal Outputs TX Disable Input Single +3.3V Pow er Supply A bsolute Maximum R atings Parameter Storage Temperature Operating Case Temperature1 Supply Voltage Input Voltage 1 Symbol Tst "COM" "IND" Top Vcc Vin Minimum - 40 -5 - 40 0 0 Maximum + 85 + 70 + 85 + 5.0 Vcc Units C C V V Measured on top side of SFP module at the front center vent hole of the cage. An Oplink Company 21737-0969,Rev.A 2008-11-11 TR PE 0 3-E 1 Single Mode Transmitter Perf ormance C haracteristics (Over Operating Case Temperature, VCC = 3.13 to 3.47V) Al parameters guaranteed onl at typicaldata rate l y Parameter Operating Data Rate 1 Symbol B IR-1 LR-1 & LR-2 IR-1 PO Phi/ l Po LR-1 LR-2 IR-1 & LR-1 LR-2 LR-2 ! ! Minimum - 15.0 - 5.0 10 1261 1270 1480 30 Typical 156 - 11.0 - 3.0 1310 1310 1550 - Maximum - 8.0 0 1360 1360 1580 3 1 - Units Mb/s dBm dB nm nm nm dB Average Optical Output Pow er ( coupled into single mode ber) , 50% duty cycle Extinction Ratio Center W avelength Spectral W idth ( RMS) Spectral W idth ( -20dB) Side Mode Suppression Ratio Optical Output Eye 1 c RM S 2 0 SS MR Compliant w ith Telcordia G R-253-CORE and ITU -T Recommendation G .957 Data rate ranges from 50Mb/s to 266Mb/s. H ow ever,some degradation may be incurred in overall performance. R eceiver Perf ormance C haracteristics (Over Operating Case Temperature, VCC = 3.13 to 3.47V) Al parameters guaranteed onl at typicaldata rate l y Parameter Operating Data Rate 1 -10 2 Symbol B Pmin Pma x Pl os+ Pl ost_oss_ # l o" t_oss_ l on - Minimum - 34.0 - 7.0 - 45.0 2.3 0.5 1100 - Typical 156 - 36.0 0 1.5 - Maximum - 34.0 100 100 1600 - 25.0 Units Mb/s dBm dBm dBm s dB nm dB Receiver Sensitivity ( 10 BER) 2 Maximum Input Optical Pow er ( -10 BER) 10 LOS Thresholds LOS Timing Delay LOS H ysteresis W avelength of Operation Receiver Re ectance ( LR-2 only) 1 2 Increasing Light Input Decreasing Light Input Increasing Light Input Decreasing Light Input Data rate ranges from 50Mb/s to 266Mb/s. H ow ever,some degradation may be incurred in overall performance. Specified in average optical input pow er and measured w ith 223-1 PRBS at 156Mb/s and 1310nm for IR-1& LR-1,and 1550nm for LR-2. Laser Saf ety Laser Safety: A l t l ranscei vers are C l I Laser product ass s per FD A / D R H and IEC C 60825 st andards.They m ust be operat under speci ed operat ng condi i ed ! i t ons. Oplink Communications, Inc. DATE OF MA NU FACTU RE: This product complies w ith 21 CFR 1040.10 and 1040.11 Meets Class I Laser Safety Requirements Oplink Communications, Inc. 2 21737-0969,Rev.A 2008-11-11 TR PE 0 3-E 1 Single Mode Transmitter Electrical I nterf ace (Over Operating Case Temperature, VCC = 3.13 to 3.47V) Parameter 1 Input Voltage Sw ing (TD+ & TD-) Symbol VPP-DIF VIH VIL VOH VOL Minimum 0.35 2.0 0 2.0 0 Typical - Maximum 2.4 VCC 0.8 VCC# 0.3 + 0.8 Units V V V V V Input H IG H Voltage (TX Disable) 2 Input LOW Voltage (TX Disable) 3 Output H IG H Voltage (TX Fault) 2 Output LOW Voltage (TX Fault) 1 3 Di erential peak-to-peak voltage. 2 There is an internal 4.7 to 10k pull-up resistor to VccT. 3 Open collector compatible,4.7 to 10k pull-up resistor to Vcc ( ost Supply Voltage) H . R eceiver Electrical I nterf ace (Over Operating Case Temperature, VCC = 3.13 to 3.47V) Parameter 1 Output Voltage Sw ing ( RD+ & RD-) 2 Output H IG H Voltage ( LOS) Symbol VPP-DIF VOH VOL Minimum 0.6 2.0 0 Typical - Maximum 2.0 VCC# 0.3 + 0.5 Units V V V Output LOW Voltage ( LOS) 1 2 2 Di erential peak-to-peak voltage across external 100 load. Open collector compatible,4.7 to 10k pull-up resistor to Vcc ( ost Supply Voltage) H . Electrical Pow er Supply C haracteristics (Over Operating Case Temperature, VCC = 3.13 to 3.47V) Parameter Supply Voltage Supply Current OC-3 ( IR-1,LR-1) Symbol VCC ICC Minimum 3.13 Typical 3.3 190 Maximum 3.47 220 Units V mA Module D ef inition MO D _D EF(0) pin 6 TTL LOW MO D _D EF(1) pin 5 SCL MO D _D EF(2) pin 4 SDA I nterpretation by H ost Serial module definition protocol Electrical Pad Layout 20 19 18 17 16 15 14 13 12 11 TX G ND TD- (TX DATA IN-) TD+ (TX DATA IN+) TX G ND VccTX VccRX RX G ND RD+ ( DATA OU T+) RX RD- ( DATA OU T-) RX RX G ND H ost B oard C onnector Pad Layout 20 19 18 17 16 15 14 13 12 11 Tow ard A SI C 1 2 3 4 5 6 7 8 9 10 TX G ND TX Fault TX Disable MOD_DEF( 2) MOD_DEF( 1) MOD_DEF( 0) NO CONNECTION LOS RX G ND RX G ND 1 2 3 Tow ard B ezel 4 5 6 7 8 9 10 Top of Board Bottom of Board (as viewed thru top of board) Oplink Communications, Inc. 3 21737-0969,Rev.A 2008-11-11 TR PE 0 3-E 1 Single Mode Example of SFP host board schematic 1mH c l f rt bead oior eri e ( 2W s isr it nc <0. ere essa e) Vc c 3. 3V Vc c 3. 3V + 10 0. 1 0. 1 16 RRR 2 8 4 5 6 50W l i ne 13 50W l i ne 12 R R TX Faul t LOS MOD_DEF( 2) MOD_DEF( 1) MOD_DEF( 0) RX DATA OUT+ to 50W load RX DATA OUTto 50W load + 15 10 0. 1 TRPE0 3 E1 TX Diabl se 50W l i ne TX DATA IN+ 50W l i ne TX DATA IN19 18 3 1,9, 11, 17, 10, 14, 20 R:4.7 to 10k CA P Values in F A pplication N otes Electrical Interface: A ll signal interfaces are compliant w ith the SFP MSA specification. The high speed DATA interface is differential AC-coupled internally w ith 1 F and can be directly connected to a 3.3V SERDES IC. A ll low speed control and sense output signals are open collector TTL compatible and should be pulled up w ith a 4.7 - 10k resistor on the host board. Loss of Signal (LOS): The Loss of Signal circuit monitors the level of the incoming optical signal and generates a logic H IG H w hen an insufficient photocurrent is produced. TX Fault: The output indicates LOW w hen the transmitter is operating normally,and H IG H w ith a laser fault including laser end-of-life. TX Fault is an open collector/drain output and should be pulled up w ith a 4.7 - 10k resistor on the host board. TX Fault is non-latching ( automatically deasserts w hen fault goes aw ay) . TX Disable: W hen the TX Disable pin is at logic H IG H , the transmitter optical output is disabled ( less than -45dBm) . Serial Identification and Monitoring: The module definition of SFP is indicated by the three module definition pins, MOD_DEF( ,MOD_DEF( and MOD_DEF( . U pon pow er up, 0) 1) 2) MOD_DEF( 2)appear as NC ( connection) and MOD_DEF( 1: no , 0) is TTL LOW . W hen the host system detects this condition, it activates the serial protocol ( standard tw o-w ire I2C serial interface) and generates the serial clock signal ( SCL) The . positive edge clocks data into the EEPROM segments of the SFP that are not w rite protected,and the negative edge clocks data from the SFP. The serial data signal ( SDA ) is for serial data transfer. The host uses SDA in conj unction w ith SCL to mark the start and end of serial protocol activation. The supported monitoring functions are temperature,voltage,bias current,transmitter pow er,average receiver signal,all alarms and w arnings,and softw are monitoring of TX Fault/LOS. The device is internally calibrated. The data transfer protocol and the details of the mandatory and vendor specific data structures are defined in the SFP MSA , and SFF-8472,Rev. 9.4. Power Supply and Grounding: The pow er supply line should be w ell-filtered. A ll 0.1 F pow er supply bypass capacitors should be as close to the transceiver module as possible. Oplink Communications, Inc. 4 21737-0969,Rev.A 2008-11-11 TR PE 0 3-E 1 Single Mode Package O utline 41.80 [1.646] 13.62 [.536] 14.94 [.588] 45.00 [1.772] 6.25 [.246] 1.99 [.078] [.257] 6.54 0.60 [.024] 435 and P y rmont, CA958 e (1) 3-20 ax(1) 3-30 mail:ale 63 L ing kw Fe 43 Tl: 0 9370 F : 0 9370 E S s@Oplink.com * w .oplink.com 5 5 ww [.470] 11.94 [.362] 9.20 10.45 2.29 [.090] 13.80 [.543] 1.49 [.059] 2.50 [.098] 0.60 [.024] 0.45 [.018] [.411] Dimensions in inches [ mm] Default tolerances: .xxx = .005",.xx = .01" O rdering I ormation nf Part N umber O perating Temperature Latch C olor Yellow Red W hite Yellow Red W hite N ominal W avelength 1310nm 1310nm 1550nm 1310nm 1310nm 1550nm SO N ET/ H SD Standards IR-1/S-1.1 LR-1/L-1.1 LR-2/L-1.2 IR-1/S-1.1 LR-1/L-1.1 LR-2/L-1.2 D istance1 21/15km 50/40km 100/80km 21/15km 50/40km 100/80km TRPE03A I1C000E12 TRPE03EL1C000E1 TRPE03EL2C000E1 TRPE03A I1I000E12 TRPE03EL1I000E1 TRPE03EL2I000E1 1 2 - 5C to +70C - 5C to +70C - 5C to +70C - 40C to +85C - 40C to +85C - 40C to +85C These are target distances to be used for classi cation and not for speci cation,per Telcordia G R-253-CORE/ITU -T Recommendation G .957. The TRPE03A I1C000E1 and TRPE03A I1I000E1 can also be used for short reach SR-1/I-1 applications. Oplink Communications,Inc. reserves the right to make changes in equipment design or speci cations w ithout notice. Information supplied by Oplink Communications,Inc. is believed to be accurate and reliable. H ow ever,no responsibility is assumed by Oplink Communications,Inc. for its use nor for any infringements of third parties,w hich may result from its use. No license is granted by implication or otherw ise under any patent right of Oplink Communications,Inc. 21737-0969,Rev.A (c) 2008,Oplink Communications,Inc. 5 2008-11-11 [.333] 8.46 |
Price & Availability of TRPE03AI1C000E1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |